Construction Chemicals

Product Details:

Other Details:
Excellete Water Reducing
Properties Confirming To I.S. 9103-99

Description
Two component elastomeric coating 

Benefits/ Features 
Elastomeric flexible coating that bridges cracks up to 0.5 mm to 2 mm width with an elasticity of 40-50% 
Four times thicker than ordinary polymer cement coating with dry film thickness of 1 mm 
Excellent resistance to ingress of water 
Excellent adhesion to concrete and masonry surfaces 

Application
Appearance grey powder +white liquid 
pot life at 30 degree centigrade approx 30min
mixing ratio 2;1

Additional Information:

• Delivery Time: 1-3
• Packaging Details: (2+1)-(10+5)kg

Product Details:

Zycosil Max is a new generation reactive organosilane based water proofing agent that seals nanopores&nano-cracks.It  is concentrated highly penetrative &a strong water-repellent it has an ability to penetrate up to 4mm deep

Product Details:

Nitoproof 600PF is a single component pitch free PU based liquid polyurethane. It cures by reaction with atmospheric moisture to form a tough, elastomeric, waterproof membrane. Nitoproof 600PF is designed for use on horizontal and vertical surfaces, covered by a protective screed or render

Additional Information:

• Delivery Time: 1-3 days
• Packaging Details: 25 kg Bucket

Product Details:

• Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. 
• One of the primary characteristics of this grout is that it is non-shrink, meaning it doesn't undergo significant volume reduction after it has set. 
• It is formulated to be corrosion-resistant, making it suitable for use in environments where exposure to moisture and chemicals is a concern.

Additional Information:

• Packaging Details: bag

Product Details:

Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.

Product Details:

Conplast WL is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. Conplast WL waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder waterproofers as its use results in two fold improvement of concrete or mortar.

Additional Information:

• Packaging Details: Drum

Product Details:

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Additional Information:

• Delivery Time: 1
• Packaging Details: Bag

Product Details:

Epoxy tile grouts are resistant to stains and chemicals, and they have low water absorption and high compressive strength . Not only that, epoxy-based grouts also resist abrasion and shrinkage , and they have hygienic qualities that prevent bacterial

Additional Information:

• Delivery Time: 1-3
• Packaging Details: Bucket

Product Details:

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking. Renderoc Plug provides an initial set time of approximately one minute.

Additional Information:

• Delivery Time: 1
• Packaging Details: Bag

Product Details:

ArmGrout NS 65 is recommended for precision grouting where it is essential to withstand static load in typical applications like base plate of generators, compressors, boilers ect.It is basically a free flow non-shrink, high strenth expansive grout.

Additional Information:

• Delivery Time: 1-3
• Packaging Details: Bag

Product Details:

Eopxy systam for waterproofing and repairs, bonding strenth, low viscosity, surfase area terraces, bathtrooms, podiums and water tanks.

Product Details:

Magik Epoxy Clear is a two component low viscous
liquid used to fuse natural as well as artificial stone to
fill porosity, hairline crack, major crack and hole.
System will also enhance the colour of natural stone
as well as i

Additional Information:

• Delivery Time: 1-3
• Packaging Details: can